Report geometry
Entered numbers remain unchanged in the form and saved report. Print raw + rounded tables produces both sheets, plus a root-area overlap sheet when enabled. Ref A = 0 at the left. Ref B = weld centerline. Forward and aft boundaries are half the weld width from Ref B. Plotted depth 0 is the tee attachment surface. Through Member converts depths from the opposite face using plate thickness; HS / FS is applied first.
Indications
| No. | Ref A start (in.) | Length (in.) | Ref B distance (in.) | F / A | Min depth entered (in.) | Max depth entered (in.) | Plotted depth min–max (in.) | Height (in.) | Code | Amplitude | Beam direction | Disposition | Show in views |
|---|
Root-area overlap · opposite beam directions
Compares Ref A intervals for indications within 0–0.25 in. forward or aft of Ref B, scanned F/FWD against A/AFT. A shared endpoint alone is not an overlap. All entered indications are evaluated, including marks hidden from the views.
| F/FWD Beam Direction | A/AFT Beam Direction | Overlap Ref A start (in.) | Overlap Ref A end (in.) | Overlap length (in.) | Ref B separation (in.) |
|---|
No overlapping root-area indications scanned from opposite directions.
Rounded review copy
This preview is separate from the entered data. The printed rounded sheet applies both rounding rules.
| No. | Ref A | Length | Ref B | F / A | Min depth | Max depth | Height (in.) | Code | Amplitude | Beam | Disposition |
|---|
Plan view · longitudinal position and forward / aft location
The thin mark begins at Ref A and extends by the stated length. The label gives its number and code.
Side view · longitudinal position and depth
End view · forward / aft and depth
End view is schematic for depth and lateral position; numbered marks may overlap.
3D orientation
Blue = accepted · red = rejected. The base is translucent to reveal indications below the surface.